Professional TV equipment design, development and production.

•         
• About us
• Address
• Certificates
• Support
• Articles
• Prices

Main / Optical interfaces / POTR-7209(D)

POTR-7209-(D) optical transceivers provide the 10/100/1000BaseT FastEthernet bidirectional communication over an optical fiber. A pair of POTR-7209-(D) provide the full duplex link over one or two (modification index “D”) optical fibers. The following modifications exist:

Features

• Half/Full duplex and speed autonegotiation
• optical link FastEthernet activity indication
• optical link connectivity indication
• optical wavelengths: 1310±20nm, WDM: 1310±20nm and 1550±20nm, CWDM: any in 1270~1610nm band
• single- and dual-fiber modifications

General description

An RX input electrical signal of FastEthernet stream is reclocked and converted into optical signal available at the optical output.

An optical signal is detected, processed and FastEthernet stream is provided at TX output.

In a dual-fiber modification (index “ D ”) one fiber is used to transmit, the other is used to receive on the 1310nm (1550nm by request) wavelength. For the CWDM optical systems the external MUX/DEMUX are required, RX and TX are on the different CWDM wavelengths.

A single-fiber modification is fitted with the built-in optical MUX/DEMUX.

Technical specifications

• FastEthernet input/output
  

  Standard compliance	IEEE 802.3u (100BaseTX) , IEEE 802.3z/AB (1000BaseT)
  Connector type	RJ-45
  Cable type	Cat.5 UTP, up to 100 meters

• Optical input/output
  

  Connector type		LC
  Output optical power	single-fiber modification	-5dBm
  	dual-fiber modification	-3dBm
  Optical sensitivity	single-fiber modification	-20dBm
  	dual-fiber modification	-25dBm
  Optical sensitivity band		1270~1610nm

The remote control and management from a PC

All the “PROFLEX” modules are remote controllable from a PC. This facility is available if a rack is fitted with a CPU module (ordered separately).