Professional TV equipment design, development and production.

 
     
   

Products by family

 
 

 

Products by topic

Main / MPEG4 (H.264/AVC) encoders, decoders, transcoders / PMPD-3610

PMPD-3610 series professional decoder (MPEG4(H.264/AVC)=>HD/SD SDI, PAL/SECAM, analog/AES audio)

PMPD-3610 series professional decoder accepts the DVB-ASI or Ethernet 100BaseT MPEG4(H.264/AVC) streams to decode into the HD/SD SDI, PAL/SECAM video and analog/AES audio signals.

PMPD-3610 features the 19" rack's 1U case.

The following operational modes:

  • Input: DVB-S2/ASI/opticalASI; output: âûõîä âèäåî/àóäèî ïëþñ âûõîäû TS â ASI è ETHERNET ñ ðàçäåëüíûì ðåäàêòèðîâàíèåì PIDîâ
  • ETHERNET input, video/audio and ASI TS output with editable PID

Features

  • MPEG-4 (AVC Part.10) MP@L3 processing and decoding for SMPTE 259M compliant SD signals
  • MPEG-4 (AVC Part.10) MP@L4 processing and decoding for SMPTE 292M compliant HD signals with optional HD->SD convertion (the frame frequency not altered)

The following input and output interfaces:

  • one ASI input and one ASI output with PID-filtering and cascadability
  • optional optical ASI input
  • L-band DVB-S2 pass-through input
  • two SD/HD SDIembedded outputs
  • two SECAM/PAL outputs
  • monitor video output with the bargraph audio level meter OSD:
    • PAL output for SD SDI input
    • HD SDI output for HD SDI input
  • optional pass-through REF input for the output video signal synchronization
  • user-configurable set of audio outputs (either of):
    • one analog stereo pair or one AES/EBU
    • two analog stereo pairs or two AES/EBU
    • four AES/EBU
  • one 100 BaseT Ethernet port for remote management
  • two 100 BaseT Ethernet ports for MPEGoIP streams via either RTP or UDP (only one port available at a time)
  • one USB port
  • RS-232 output
  • GPI output

Video decoder

   
Video compression MPEG-4/ AVC Ðart.10 MP@L3 (SD)
MPEG-4/ AVC Ðart.10 MP@L4 (HD)
digital SD video output (two BNC connectors) SMPTE259M compliant SD SDIembedded
digital HD video output (two BNC connectors) SMPTE292M compliant HD SDIembedded
main analog SD video output (two BNC connectors) SECAM composite video (GOST-7845-92, OST 58-18-96)
PAL composite video
monitor analog SD video output PAL composite video with the bargraph audio level meter OSD
monitor HD video output HD SDI video with the bargraph audio level meter OSD
aspect ratios 4:3 and 16:9
image resolution SD: 720*576
HD: 1920*1080/i, 1280*720/p
bit rates SD: 0.3~10Mbps
HD: 0.3~20Mbps
VBI contents handling WST
inverted WST
WSS

Audio decoder

   
number of audio channels up to four stereo pairs
decompression compatibility MPEG I Layer II
audio gain presets ±6dB in 0.5dB increments, independent for each channel pair
audio outputs analog balanced
AES/EBU
audio bit rate support MPEG1 Layer II: from 56kbps to 384kbps
frequency response ripple less than 3dB for 20Hz~20kHz band at 384kbps and 48kHz sampling

Ethernet 100BaseT interface

   
remote management one dedicated IP port
MPEGoIP two ports
input bit rate up to 40Mbps
IP payload structure MPEG TS over RTP/UDP/IP, up to seven TS packets per one IP frame
MPEG packet size 188 bytes
MPEG TS type multiprogram or singleprogram
output stream addressing Unicast or Multicast
error correction ProMPEG FEC COP3 (optional)

DVB-ASI interface

   
intrface type ASI input/output
MPEG packet format 188/204 bytes per packet
  multiprogram or singleprogram TS up to 40Mbps

DVB-S2 interface

   
frequency band 950~2150MHz
symbol rate up to 45Msym/s
TS speed up to 107Mbps

Optical interface

   
input wavelengths 1100~1600nm
optical sensitivity -30dBm
optical connector type FC/PC

2019 PROFITT Ltd