Professional TV equipment design, development and production.

•         
• About us
• Address
• Certificates
• Support
• Articles
• Prices

Main / Changeovers (video, audio, SDI) / PRB-100

PRB-100 series latching relay bypass module is intended for commuting the PAL/SECAM, HD/SD SDI, stereo audio (analog or AES/EBU) signals providing an emergency bypass facility. The PRB-100A modification is for audio-only bypass commutation.
PRB-100(A) is controllable from its frontal panel and by external GPI commands.
The latching relay used for switching allows for resuming the selected state during the power down condition.
PRB-100(A) may be used as the 2x1 relay switch, in this case its OUT1 port is used as the main output, the INA and INB ports - as the two inputs. The GPO output reflects the "NORM/BYPASS" status.

PRB-100(A) is featuring the 1U case.

The «NORM» and «BYPASS» backlit buttons are located at the frontal panel.

PRB-100(A) frontal panel view

PRB-100 rear panel view

PRB-100A rear panel view

The clamp-on «GPI» input connectors accept the “NORM” and “BYPASS” commands.

The clamp-on «GPO» output connector delivers the “NORM” and “BYPASS” statuses.

Technical specifications

• Inputs
  • Video
    • SMPTE292M compliant HD SDI, SMPTE259M A,B,C,D compliant SD SDI, DVB/ASI
    • Rec.ITU-R BT.470.6 compiant PAL/SECAM
    • BNC connectors
    • 3ms switching time
  • Audio
    • analog stereo
      • 0dB nominal level
      • +21dB maximum level
    • AES/EBU
    • XLR-3 connectors
    • 3ms switching time
• Outputs
  • output parameters are as per input - dry-reed relay guarantees the signal transparency
• Power
  • 220VAC mains supply
  • less than 5W power consumpltion
• Dimentions and weight
  • 482*44*110mm width*height*depth
  • less than 1.5kg