|
Main / Changeovers (video, audio, SDI) / PRR-4068P
| PRR-4068P series remote control console for PRSD-4068 series SDI/video/audio changeovers |
The PRR-4068P series remote console provides the management capability for the PRSD-4068 series of SDI/video/audio changeovers.
The console is connected to the changeover by an eight-wire cable with RJ-45 connectors.
PRR-4068P console is 1U rack-mountable module.
Controls and indicators
The STATUS indicators display:
- operation mode (A, B or AUTO)
- VIDEO set of parameters (main and standby inputs):
- SDI:
- lit in green: signal present
- lit in red: signal lost
- not lit: signal loss monitoring is OFF
- EDH:
- lit in green: EDH packets present, no errors
- lit in red: EDH packets present, EDH errors detected
- not lit: no EDH packets, analysis is OFF
- MOTION:
- lit in green: picture contents is "live"
- lit in red: picture contents is static/frozen
- not lit: picture contents analysis is OFF
- DIF. LEVEL:
- lit in green: level difference is within the preset limit (2~6dB)
- lit in red: level difference is outside of the preset limit
- not lit: level monitoring is OFF
- AUDIO:
- SDI or AES/EBU modifications:
- lit in green: SDIembedded or AES/EBU audio detected
- lit in red: no audio
- not lit: audio monitoring is OFF
- ANALOG audio modification: LEDs are always OFF
- AUDIO LEVEL:
- lit in green: level difference is within the preset limit (2~12dB)
- lit in red: level difference is outside of the preset limit
- not lit: level monitoring is OFF
- MONITOR output control:
- MAIN: the main output is being monitored
- STANDBY: the stand-by output is being monitored
Under the GPI control (the "GPI" LED is lit) all buttons are locked, the "STATUS" LEDs are OFF.
The NET is lit when the EtherNet connectivity is established. All local buttons and indicators are operational.
|
